[Demelerlab] [External] Analytical Ultracentrifugation Analysis of Cannula-mimetic Proteins

[Borries Demeler]

This sounds good to me. Glad to hear the proteins were not damaged by the
elevated temperature storage conditions. We will commence our studies using
the samples you provided. The last thing we need to know is what the EDTA
concentrations in the buffer are of the samples you provided to us.

-Borries

On Thu, Sep 7, 2023 at 10:55 AM Conticello, Vincent <vcontic at emory.edu>
wrote:

> Hi Reece. The samples should be good since the proteins are thermostable,
> that is, from a hyperthermophilic organism even though expressed in E.
> coli. Andres can answer the first part of your question regarding the
> buffers since he prepped the samples. For the initial experiments in the
> presence of calcium, the samples should be incubated at ambient temperature
> in the presence of calcium ion, probably for an hour. CanA might not
> oligomerize under these conditions, while the Hyper2 sample should. If the
> initial calcium experiments do not demonstrate oligomerization, the Hyper2
> sample can be incubated for 24 hours at ambient temperature. I would not
> heat the Hyper2 sample since it might rapidly polymerize (based on our
> experience). With regard to the CanA sample, I would suggest using the 10
> mM or maybe 20 mM calcium ion concentration at higher temperature. If we
> wanted to detect the presence of oligomers, we might not want to heat the
> sample to higher temperatures (typically we use 80C for filament formation
> followed by cooling to ambient to induce polymerization).I think that 37
> degrees is a good compromise. Would you run the instrument with the sample
> at 37 or incubate at 37 and run the sample at ambient? If the latter, it
> may be best to start out at 1 hr incubation at elevated temp. Best, Vince
>
> Vincent P. Conticello, Ph.D.
> Professor
> Department of Chemistry
> Emory University
> ------------------------------
> *From:* Martin, Reece <reece.martin at uleth.ca>
> *Sent:* Wednesday, September 6, 2023 7:11 PM
> *To:* Gonzalez Socorro, Andres <andres.gonzalez.socorro at emory.edu>;
> Conticello, Vincent <vcontic at emory.edu>
> *Cc:* Borries Demeler <demeler at gmail.com>; demelerlab at biophysics.uleth.ca
> <demelerlab at biophysics.uleth.ca>
> *Subject:* [External] Analytical Ultracentrifugation Analysis of
> Cannula-mimetic Proteins
>
> Hi Vince and Andres,
>
> Considering that the samples arrived at room temperature (the exact length
> of time is unknown), and that an ice pack leaked (the samples appear to
> have been sealed properly). We are just looking to confirm that you feel it
> is worth continuing to process this batch of samples, taking into account
> your insight into the temperature-stability of the proteins at ambient
> temperature.
>
> If so, as per the updated experimental design in the LIMS, we will start
> out running both CanA and Hyper2 at a high and low concentration in the
> EDTA-containing buffer at 20 degrees Celsius. To accomplish this, I need to
> know what buffer each of the protein stocks are in and whether or not
> they contain EDTA.
>
> If this experiment is successful, we will repeat in the presence of
> calcium ions (10mM for CanA, and 1mM for Hyper2). For this we need to know
> at what temperature and for how long the samples should be incubated with
> the CaCl2 solution. Finally, if this experiment is successful, we will look
> at repeating with increased calcium ion concentrations, as well as running
> at a higher temperature such as 37 degrees Celsius.
>
> I'll report back on the results from the first run, which will take place
> this week.
>
> Cheers,
>
> Reece
>
> --
> Reece Martin, B.Sc
> M.Sc. Candidate
> Northwest Biophysics Consortium
> Alberta RNA Research and Training Institute (ARRTI)
> Lab of Dr. Borries Demeler
> Department of Chemistry and Biochemistry
> University of Lethbridge
> Email: reece.martin at uleth.ca
> Phone: 403-498-5882
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.biophysics.uleth.ca/pipermail/demelerlab/attachments/20230907/2121d49e/attachment.html>